Environment
:
GWAVA 4
NETWARE 6.5, 6, 5.1
LINUX OES, SLES9.3, SLES10.x
GWAVA 4
NETWARE 6.5, 6, 5.1
LINUX OES, SLES9.3, SLES10.x
Situation
How to use 4 state check boxes.
Resolution
:
By default, each check box associated with a service is displayed as a "two-state" check box -- ON or OFF (except the check boxes on the anti-virus page). These check boxes work just as any other check box and are usually all that's needed to configure your system
By default, each check box associated with a service is displayed as a "two-state" check box -- ON or OFF (except the check boxes on the anti-virus page). These check boxes work just as any other check box and are usually all that's needed to configure your system
There are some cases where using the four-state check box can be useful. The whole point behind four-state check boxes is to give you the ability to give certain events preference over
Additional Information
This article was originally published in the GWAVA knowledgebase as article ID 263.