Environment
GWAVA 4+
Linux
Situation
After running the set_net.sh script ctasd.bin still fails to load
Resolution
The /etc/hosts file may have an incorrect entry. Follow these steps to make sure that the /etc/hosts file is setup correctly:
1) Login to the Linux machine via SSH
2) Browse to /etc
3) Run the command "cat hosts". The result should look like the following:
4) If the result is different, modify the file to look similar to the image above:
127.0.0.1 locahost
xxx.xxx.xxx.xxx HOSTNAME.domain HOSTNAME
(xxx.xxx.xxx.xxx is the IP Address of the GWAVA server)
Additional Information
This article was originally published in the GWAVA knowledgebase as article ID 1498.